Load data for:
.338 Rem. Ultra Mag || .338 | 265gr | CutEdge MTH
You need to be a member to bookmark a load - more info here!
Technical Specifications
Bullet: | .338 | 265gr | CutEdge MTH |
Bullet Weight: | 265gr | 17.2g |
Bullet Diameter: | 0.338" | 8.59mm |
Bullet Length: | 1.826" | 46.4mm |
Caliber: | .338 Rem. Ultra Mag |
Case Length (l3): | 2.760" | 70.1mm |
Cartridge Length (C.O.L.): | 3.546" | 90.1mm |
Seated Depth: | 1.040" | 26.4mm |
Shank Seated Depth: | 0.787" | 20.0mm |
Case Capacity: | 110.0 Grains of Water | 7.14 cm3 |
Max. allowed Pressure: | 63817 psi | 4400 bar |
Primer Size: | Large Rifle Magnum (LRM) |
LID: | LID_B8523_C459 |
Load description
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.
Applied measure system: imperial .You can change setting in your account > Profile > Bottom of Page
a load must fulfill certain criteria to be listed below - see here.
our load data might deviate from other sources - see most common reasons here.
all loads are based on the bullet and case dimensions shown further below - see here what to do if you deviate.
you can set your own specifications in the "Personalized Load Calculator"
Go to "My Account " bottom of the page to define the measure system (imperial vs. metric)
No data yet
.
You can add a specific load / powder from below to your Diary and manage there.
select powder first
you have over 25 entries already. Go to your Diary and delete some to add new ones.
Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
Max Load - Barrel Length: 23.6" | 60.0cm
Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
Start Load - Barrel Length: 23.6" | 60.0cm
FR ... fill rate of the cartridge in percent
MaxP ... max. pressure of load in psi
% ... max. pressure of load in percent of the maximum allowed pressure for this caliber
V(0) ... muzzle velocity in feets per second (fps)
z ... powder burnt in percent
[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.